ML-24
3ea. Bright NVIS Green A LEDs on MAXILLO Face Shield. 3ea. Bright NVIS Green A LEDs on Mike
Compatible with all night vision goggles and devices. Preserves dark adaptation. A generation III product. The Toggle Switch on the Battery Snap alternates between the LEDs on the MFS (MAXILLO Face Shield), and the LEDs on the Microphone. The Switch on the Microphone is a Push ON - Push OFF switch that can be actuated by the lip or tongue. This switch will activate whichever LEDs have been selected by the switch on the Battery Snap. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. There is a quick disconnect on the MFS light which allows the MFS to be easily removed. Uses 2ea. AA batteries (not included). Maxillo Face Shield not included.
THIS IS A 3.0 VOLT LIGHT. USE 2ea. AA BATTERIES. DO NOT USE A 9.0 VOLT BATTERY.
Includes: 1ea. ML-24, 1ea. header card with mounting instructions, 1ea. 1"x1.75" adhesive backed loop velcro, 1ea. BGAA/1 Battery Holder Bag , 1ea. ML-2-7 (2ea AA battery holder, Plastic), 6ea. wire ties, 1ea. 5/8"x1/8" adhesive backed hook & loop velcro, 1ea. thumb screw, 1ea. 0.5"x1.25" aluminum clip w/ 2pcs. bonding tape & bonded to mount the CL body to the MFS, 1ea. ML-Dim, 2ea. insulating shields.
3ea. Bright NVIS Green A LEDs on MAXILLO Face Shield. 3ea. Bright NVIS Green A LEDs on Mike
Compatible with all night vision goggles and devices. Preserves dark adaptation. A generation III product. The Toggle Switch on the Battery Snap alternates between the LEDs on the MFS (MAXILLO Face Shield), and the LEDs on the Microphone. The Switch on the Microphone is a Push ON - Push OFF switch that can be actuated by the lip or tongue. This switch will activate whichever LEDs have been selected by the switch on the Battery Snap. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. There is a quick disconnect on the MFS light which allows the MFS to be easily removed. Uses 2ea. AA batteries (not included). Maxillo Face Shield not included.
THIS IS A 3.0 VOLT LIGHT. USE 2ea. AA BATTERIES. DO NOT USE A 9.0 VOLT BATTERY.
Includes: 1ea. ML-24, 1ea. header card with mounting instructions, 1ea. 1"x1.75" adhesive backed loop velcro, 1ea. BGAA/1 Battery Holder Bag , 1ea. ML-2-7 (2ea AA battery holder, Plastic), 6ea. wire ties, 1ea. 5/8"x1/8" adhesive backed hook & loop velcro, 1ea. thumb screw, 1ea. 0.5"x1.25" aluminum clip w/ 2pcs. bonding tape & bonded to mount the CL body to the MFS, 1ea. ML-Dim, 2ea. insulating shields.
3ea. Bright NVIS Green A LEDs on MAXILLO Face Shield. 3ea. Bright NVIS Green A LEDs on Mike
Compatible with all night vision goggles and devices. Preserves dark adaptation. A generation III product. The Toggle Switch on the Battery Snap alternates between the LEDs on the MFS (MAXILLO Face Shield), and the LEDs on the Microphone. The Switch on the Microphone is a Push ON - Push OFF switch that can be actuated by the lip or tongue. This switch will activate whichever LEDs have been selected by the switch on the Battery Snap. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. There is a quick disconnect on the MFS light which allows the MFS to be easily removed. Uses 2ea. AA batteries (not included). Maxillo Face Shield not included.
THIS IS A 3.0 VOLT LIGHT. USE 2ea. AA BATTERIES. DO NOT USE A 9.0 VOLT BATTERY.
Includes: 1ea. ML-24, 1ea. header card with mounting instructions, 1ea. 1"x1.75" adhesive backed loop velcro, 1ea. BGAA/1 Battery Holder Bag , 1ea. ML-2-7 (2ea AA battery holder, Plastic), 6ea. wire ties, 1ea. 5/8"x1/8" adhesive backed hook & loop velcro, 1ea. thumb screw, 1ea. 0.5"x1.25" aluminum clip w/ 2pcs. bonding tape & bonded to mount the CL body to the MFS, 1ea. ML-Dim, 2ea. insulating shields.
